DIY paper snowflake decorations

Somehow my gift wrapping session turned into a snowflake cutting session. I wanted to try making some snowflakes that look a little more 3D than the usual version. These are made with computer paper, a stapler, double-sided tape, and a scissors.

If you've got standard staples that are 1/2" wide, accordian-fold a sheet of computer paper so that the pleats are 8 1/2" wide by about 3/4". If you get to the end of the sheet and have a little extra paper left over, trim it off.

Staple the folded paper as close to the center of the stack as your stapler will reach. Fold the stack in half at the staple and cut off any excess paper from the long side. The staple should now be in the center.

Unless you're using extra thin paper or you have super-human strength, you won't be able to cut through all the layers of paper when the stack is folded in half. So unfold the stack and cut a snowflake pattern out of one half, then repeat for the other half, duplicating your design.

Pull open the accordian folds and join two adjacent ends with double-sided tape, forming a semicircle.

Repeat the process to make the other half of the snowflake decoration, cutting the same design from a second piece of folded paper. Join the two halves together with more tape.

Try making smaller snowflakes from a single piece of paper—put the staple closer to one end of the folded stack and cut more off the other end.
You have read this article christmas / paper / tutorials with the title DIY paper snowflake decorations. You can bookmark this page URL http://jenkrebs.blogspot.com/2011/12/diy-paper-snowflake-decorations.html. Thanks!

1 comment for "DIY paper snowflake decorations"

  1. La mayoría, no a otra persona que se convierte en una barrera para ganar, pero por sí solo no están dispuestos a ser el ganador.
    http://migre.me/qnD7S
    http://migre.me/qnCnp
    http://migre.me/qnCBF
    http://migre.me/qnCJE

    ReplyDelete